More Info > Instructions to use GPS > Switching on your GPS

Switching on your GPS Start off by switching on the Garmin GPS unit by pushing the switch on top of the GPS to the left. Push towards the same direction again to switch it off. Push to the left to trigger the screen lock.

By pressing “Agree”, it will direct you straight to the main menu which looks like this:


Using your GPS
1. Get a GPS Satellite Signal. The signal bar is at the top left corner of the GPS Main menu. Your GPS is ready when your signal bar turns green. To get a signal, ensure that you are outdoors, under the sky and away from buildings which may interfere in getting the signal. Stay at the same position and do not move around while trying to get the signal.

2. To know where your current location is, press “View Map”. To find a location, press “Where to?”

Term & Condition:
1) For cars tinted with V-Kool film or others, if the Smart tag does not work, it will be the same for our GPS.

2) To locate the current position, kindly perform a link up of the GPS under the sky.

3) The portable GPS is strongly recommended to be mounted on the windscreen. 4) When outside switching on with the antenna open, it takes less than 4 minutes to get the satellite signal.

[+ View full Instructions here ]